| 56 |
Streamlining Open-Source CFD: A Comparative Study of GUI-based vs. Script-based OpenFOAM Workflows |
Medehal Pavan Sai Tarun |
VIT BHOPAL |
2026 |
| 55 |
Numerical study of single air bubble formation in viscous liquid |
Debdip Biswas |
National Institute of Technology Calicut |
2026 |
| 54 |
Comparison of Viscosity Models for the Simulation of Non-Newtonian Flow in Lid-Driven Cavity |
Shreyas Shrestha |
Tribhuvan University |
2025 |
| 53 |
Comparative Analysis of Wave Models and Motion Dynamics of a Freely Floating Barge |
Samim Khadka |
Tribhuvan University |
2025 |
| 52 |
OpenFOAM Case Generation and Traversal using LLMs |
Suyash Mishra |
Indian Institute of Information Technology Manipur |
2025 |
| 51 |
OpenFOAM Case Genration and Traversal using LLM |
Vedant Dubey |
National Institute of Technology Raipur |
2025 |
| 50 |
DEVELOPMENT OF NODE-BASED OPENFOAM CASE GENERATOR IN PYQT FOR OPENFOAM GUI |
Navya Sai Sadu |
Jawaharlal Nehru Technological University, Hyderabad |
2025 |
| 49 |
Flow Around a Plunging Airfoil: A Study Using the New Immersed Boundary Method Algorithm in foam-extend 4.1 |
Sugam Lamsal |
Tribhuvan University |
2025 |
| 48 |
Numerical Simulations of Fluid Flow in Pipe Presenting Effect of Fluid Viscosity and Flow Coefficient (Cv) calculations |
Ketan Prafull Kulkarni |
Savitribai Phule Pune University |
2025 |
| 47 |
Development of Parser for PyVnt and Visual Representation of PyVnt Node in Blender |
Yash Suthar |
Dayananda Sagar College Of Engineering, Bangalore, Karnataka |
2025 |
| 46 |
Enhancing the OpenFOAM GUI: Migration and Improvements for Blender 4.2 Compatibility |
Budhil Nigam |
Jamia Millia Islamia |
2025 |
| 45 |
Study of Rise of Multiple Bubbles in Quiescent Liquid using OpenFOAM Software |
Hyzam Kaliyadan |
Cochin University of Science And Technology |
2025 |
| 44 |
Development of a Graphical Interface for SnappyHexMesh Dictionary Generation in OpenFOAM |
Kumar Ashmit Ranjan |
Indian Institute of Technology Kharagpur |
2025 |
| 43 |
Development of Tree-node Management API for OpenFOAM GUI |
Diptangshu Dey |
National Institute of Technology Durgapur |
2025 |
| 42 |
Investigating the effect of wall-mounted V-baffle position in a turbulent flow through a channel |
Sateesh Kumar Boda |
Indian Institute of Technology, Bombay |
2025 |
| 41 |
openFoam simulation of Turbulent Flow Through T_Junction |
Prathamesh Joshi |
Indian Institute of Technology Bombay |
2025 |
| 40 |
Numerical Simulation of a Fixed-Wing UAV and the Effect of Blended Winglets |
Toran Bahadur Niroula |
Tribhuvan University |
2025 |
| 39 |
HEAT TRANSFER IN A FLUIDISED BED |
Nikhil Chitnavis |
INDIAN INSTITUTE OF TECHNOLOGY MADRAS, CHENNAI |
2024 |
| 38 |
Flow Around a Cylinder: A Comparative Study of Immersed Boundary and Arbitrary Lagrangian–Eulerian (ALE) Methods in OpenFOAM |
Antim Gupta |
Oxford Brookes University |
2024 |
| 37 |
Low Reynolds Number Flow Over Non-Rectangular Bluff Bodies |
Evan Fernandes |
Amity University Mumbai |
2024 |
| 36 |
High-speed compressible flow over blunt and re-entry bodies |
Ishar Singh Saini |
Amity University Mumbai |
2024 |
| 35 |
Numerical Analysis of Air Film Cooling Effectiveness at High Temperature and Pressure |
Veasna Mom |
Gujarat Technological University |
2024 |
| 34 |
Implementing Polylines for the OpenFOAM GUI Project |
Swapnil Ranadive |
Somaiya Vidyavihar University |
2024 |
| 33 |
Steady state CFD method for residence time distribution in different tubular geometries to evaluate the mixing |
Dhore Atharva Vilas |
Vishwakarma Institute Of Information Technology - Pune |
2023 |
| 32 |
Development of Tree-node Management API for OpenFOAM GUI |
Nitin Yadav |
Maharishi Dayanand University, Rohtak |
2023 |
| 31 |
Development of Tree-node Management API for OpenFOAM GUI |
Diptangshu Dey |
National Institute of Technology Durgapur |
2023 |
| 30 |
CFD modeling of single-phase flow in a stirred tank reactor |
Biraj Khadka |
Tribhuvan University |
2023 |
| 29 |
Response dynamics of floating body subjected to waves |
Akshay Suresh Shimpi |
IIT Madras |
2023 |
| 28 |
Implementing Splines and Usage Tutorial System for OpenFOAM GUI |
Patel Aarsh Miteshkumar |
Vellore Institute of Technology |
2023 |
| 27 |
Numerical investigation of mixing in serpentine microchannels |
Nishit Pachpande |
BITS Pilani |
2023 |
| 26 |
KCS Bare Hull Resistance |
Joseph Prabhu |
INDIAN REGISTER OF SHIPPING |
2023 |
| 25 |
CFD analysis on Flow over cylinder and impact of no of sides and orientation of cylinder on the drag in a Laminar flow |
Ridham Jignesh Shah |
IIT Bombay |
2023 |
| 24 |
Simulation of the Effective Thermal Conductivity Calculation of BCC Lattice Structure |
Abhishek Dey |
Indian Institute of Technology, Madras |
2022 |
| 23 |
NUMERICAL SIMULATION OF STIRRED TANK REACTOR |
Maharghya Dyuti Das |
University of Calcutta |
2022 |
| 22 |
NUMERICAL MODELLING OF FLOW WITHIN POROUS MEDIA USING OpenFOAM® |
Mena G Pillai |
Indian Institute of Technology Madras |
2022 |
| 21 |
Natural Convection in a Vertical Channel with fins using conjugate heat transfer solver in OpenFOAM |
Chitikena Chaitanya Kishore |
Indian Institute of Technology Madras |
2022 |
| 20 |
Numerical Simulation of a Food Sterilization Process involving Natural Convection Heating |
V Sai Yeshwanth |
Indian Institute of Technology Bombay, Mumbai |
2022 |
| 19 |
Effect of amplitude of walls on thermal and hydrodynamic characteristics of laminar flow through an asymmetric wavy channel |
Abhishek Raghuvanshi |
Indian Institute of Technology Bombay |
2022 |
| 18 |
Heat Transfer in a Trapezoidal Micro-channel with Laminar Fluid Flow |
Shantanu Shukla |
Indian Institute of Technology Bombay |
2022 |
| 17 |
Numerical Modeling of Rayleigh Taylor Instability in Confined Geometries |
Apoorv Giriya |
Indian Institute of Technology Bombay |
2022 |
| 16 |
CFD analysis of fluid flow and heat transfer in a shell and tube heat exchange in OpenFOAM |
Aabhushan Regmi |
IIT Bombay |
2022 |
| 15 |
Aerodynamic analysis of Ahmed Body |
Atharv Toraskar |
IIT Bombay |
2022 |
| 14 |
STUDY OF PRESSURE DROP IN MICROCHANNEL VARYING TEMPERATURE WITH CONSTANT BIFURCATION OF 90 DEGREE. |
Mahima Bunker |
IIT Bombay |
2022 |
| 13 |
SIMULATION OF NARROW CHANNELS WITH CORRUGATED WALLS |
Mohammed Danish |
Indian Institute of Technology Bombay |
2022 |
| 12 |
Plaque Concentration Modelling and Hemo-Acoustic Study in Axisymmetric Stenosed Coronary Artery |
Sumant |
Indian Institute of Technology Bombay |
2022 |
| 11 |
Flow And Turbulent Structures Around Simplified Car Model Using OpenFOAM |
Aditya Anand Kulkarni |
IIT BOMBAY |
2022 |
| 10 |
Numerical simulation of breakup of a viscous drop in simple shear flow through a volume-of-fluid method |
Shreya Makkar |
Indian Institute of Technology, Bombay |
2022 |
| 9 |
Study of laminar flow and heat transfer in a square channel with 30 degree inline angled baffle turbulators using OpenFOAM |
Suraj |
Indian Institute of Technology Bombay |
2022 |
| 8 |
Study of fluid flow in porous metal foams using OpenFOAM |
Ketan Yogi |
Indian Institute of Technology Bombay |
2022 |
| 7 |
Forced convection past a semi-circular cylinder at incidence with a downstream circular cylinder |
Saptarshi Joshi |
Indian Institute of Technology Bombay |
2022 |
| 6 |
CFD Analysis of Natural Convection Flow through Vertical Tube |
Bor Abubakralsedig Bor Hessian |
Indian Institute of Technology Bombay |
2022 |
| 5 |
Incompressible Flow Over NACA 0012 Airfoil Profile |
Mohamed Fadol Orsod Ornasir |
Indian Institute of Technology Bombay |
2022 |
| 4 |
Low Reynolds Number Flow Over a Square Cylinder with a Detached Flat Plate |
Sachin S B |
IIT Bombay |
2022 |
| 3 |
CFD analysis of human powered submarine |
Dibyajyoti Chakraborty |
Indian Institute of Technology Bombay |
2022 |
| 2 |
Laminar Flow Vortex Shedding Around the Cylinder |
Alsheikh Abdalmjeed Alsheikh Ali |
Indian Institute of Technology Bombay |
2022 |
| 1 |
Prediction of Turbulence in Separated Flow using Asymmetric Diffuser Geometry |
Divyesh Variya |
IIT Bombay |
2022 |
